Alpine CVA-1003R Manuel du propriétaire télécharger pdf (Page 23)

21-EN

Erasing Disc Title

1 When the monitor display is open, press the

TITLE button to select the disc titling mode.

Then, press and hold the button for at least 3

seconds.

2 Press and hold the -/J button for at least 2

seconds to activate the title scanning mode. The

title in the display will blink.

3 Press the g DN or f UP button repeatedly

until the disc title you want to erase is displayed.

4 Press and hold the -/J button for at least 2

seconds to erase the disc title displayed.

5 Press and hold the TITLE button for at least 3

seconds to cancel the disc title erasing mode.

NOTE

You cannot erase a CD-TEXT.

Controlling CD Changer

An optional 6-disc or 12-disc CD Changer may be

connected to the CVA-1003R if it is Ai-NET

compatible. With a CD Changer connected to the

Ai-NET input of the CVA-1003R, the CD Changer

will be controllable from the CVA-1003R.

Using the KCA-400C (the Multi-Changer

Switching device) multiple changers can be

controlled by the CVA-1003R.

See the Multi-Changer Selection section on page

22 for selecting the CD Changers.

NOTE

The controls on the CVA-1003R for CD Changer

operation are operative only when a CD Changer is

connected.

1 Press the SOURCE button to activate the CD

changer mode. The display shows the disc

number and track number.

NOTE

The source indicator varies depending on the connected

source.

CD Player/Changer Operation (Optional)

2 Press the Disc Select buttons (1 through 6)

corresponding to one of the discs loaded in the

CD Changer. The selected disc number appears

in the display and CD playback starts.

NOTES

• After selecting the desired disc, you can operate in the

same way as for the CVA-1003R CD player.

For details, please see the CD Operation section.

• When the "FUNC" indicator is lit in red in the monitor

display, or is lit in the sub display, the disc select

buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the

procedure is the same as for the 6-disc CD

Changer. To select discs numbered from 7 to 12,

first press the FUNC button. In the sub display,

this changes the "D" indicator to "d." The "FUNC"

indicator is lit in yellow on the monitor display.

Then press the desired Preset button. With the

FUNC button activated, the Preset buttons 1 to 6

will represent discs 7 to 12 respectively.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Alpine CVA-1003R Manuel du propriétaire Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Alpine CVA-1003R