Alpine CVA-1003R Manuel du propriétaire télécharger pdf (Page 53)

51-EN

Installation and Connections

1 ISO Antenna Convertor Plug

2 Antenna Receptacle

Connect to the supplied ISO antenna convertor plug.

3 Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio Interface output of a

cellular phone which provides ground shorting when a

call is received.

If a device having the interrupt feature is connected,

audio will be automatically muted whenever the

interrupt signal is received from the device.

4 Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your

amplifier or signal processor.

5 Parking Brake Lead (Yellow/Blue)

Connect this lead to the power supply side of the

parking brake switch to transmit the parking brake

status signals to the CVA-1003R.

6 Illumination Lead (Orange)

This lead may be connected to the vehicle's instrument

cluster illumination lead. This will allow the

backlighting of the CVA-1003R to dim whenever the

vehicle's lights are turned on.

7 Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's

fuse box or another unused power source which

provides (+) 12V only when the ignition is turned on

or in the accessory position.

8 Ground Lead (Black)

Connect this lead to a good chassis ground on the

vehicle. Make sure the connection is made to bare

metal and is securely fastened using the sheet metal

screw provided.

9 Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power

antenna, if applicable.

NOTE

This lead should be used only for controlling the

vehicle's power antenna. Do not use this lead to turn on

an amplifier or a signal processor, etc.

! Battery Lead (Yellow)

Connect this lead to the positive (+) post of the

vehicle's battery.

" Fuse Holder (15A)

# ISO Power Supply Connector

$ Remote Control Interface Connector

To remote control interface box.

% Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead.

This lead outputs the controlling signals from the

remote control.

& RGB Input Connector

( Power Supply Connector

) Left Rear (+) Speaker Output Lead (Green)

~ Left Rear (–) Speaker Output Lead (Green/

Black)

+ Left Front (+) Speaker Output Lead (White)

, Left Front (–) Speaker Output Lead (White/

Black)

- Right Front (–) Speaker Output Lead (Grey/

Black)

. Right Front (+) Speaker Output Lead (Grey)

/ Right Rear (–) Speaker Output Lead (Violet/

Black)

: Right Rear (+) Speaker Output Lead (Violet)

; ISO Connector (Speaker Output)

< System Switch

When connecting an equalizer or divider using Ai-

NET feature, place this switch in the EQ/DIV

position. When no device is connected, leave the

switch in the NORM position.

NOTE

Be sure turn the power off to the unit before changing the

switch position.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Commentaires sur ces manuels

Pas de commentaire

Alpine CVA-1003R Manuel du propriétaire Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Alpine CVA-1003R