Alpine CVA-1003R Manuel du propriétaire télécharger pdf (Page 11)

9-EN

Basic Operation

Adjusting Volume/Balance

(Between Left and Right)/Fader

(Between Front and Rear)

1 Press the MODE button repeatedly to choose

the desired mode.

Each press changes the modes as follows:

NOTES

• If the

5 or

6 button is not pressed in 5 seconds after

selecting the BALANCE, or FADER mode, the unit

automatically returns to the VOLUME mode.

• If the subwoofer is ON, its level can also be adjusted

using the MODE button.

2 Press the

5 and

6 buttons until the desired

sound is obtained in each mode.

Turning Loudness On and Off

Loudness introduces a special low- and high-

frequency emphasis at low listening levels. This

compensates for the ear's decreased sensitivity to

bass and treble sound.

1 Press and hold the LOUD button for at least

2 seconds to activate or deactivate the loudness

mode.

The display shows "LOUD" when the loudness

mode is activated.

NOTE

When connecting an external audio processor to the unit,

you cannot use this function.

→ VOL → BAL → FAD

Audio Mute Function

Activating this function will instantly lower the

volume level by 20 dB.

1 Press the MUTE button to activate the MUTE

mode. The audio level will decrease by about

20 dB.

Pressing the MUTE button again will bring the

audio back to its previous level.

NOTE

When an external interruption (e.g., vehicle phone)

happens, the display shows as follows:

The monitor display: INT.

The sub display: INTERRUPT

This function is only available when the Interrupt lead of

the Auxiliary device is connected to the unit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Alpine CVA-1003R Manuel du propriétaire Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Alpine CVA-1003R