Alpine CDA-7998 Manuel du propriétaire télécharger pdf (Page 31)

29-EN

Setting the Subwoofer Output

You can set the subwoofer output to stereo or monaural.

Make sure to set the correct output for your subwoofer

type.

1 Press and hold the SETUP button for at least 3

seconds.

2 Press the g DN or the f UP button to select

“Subwoofer STEREO.”

3 Press the BAND button to toggle the mode between

STEREO and MONO.

STEREO : Subwoofer stereo (L/R) output.

MONO : Subwoofer monaural output.

NOTE

The initial setting at the factory is Subwoofer STEREO

4 Press the SETUP button to return to normal mode.

Sound (Beep) Guide Function

This function will give audible feedback with varying

tones depending upon the button pressed.

1 Press and hold the SETUP button for at least 3

seconds.

2 Press the f UP or g DN button to select "BEEP."

3 Press the BAND button to toggle the mode between

BEEP ON and BEEP OFF.

NOTE

The initial setting at the factory is BEEP ON.

4 Press the SETUP button to set the selected mode.

Turning Mute Mode On/Off

If a device having the interrupt feature is connected,

audio will be automatically muted whenever the

interrupt signal is received from the device. This

function can be turned ON or OFF from the head unit

by following procedure below.

1 Press and hold the SETUP button for at least 3

seconds.

2 Press the f UP or g DN button to select the

INTERRUPT MUTE mode.

3 Press the BAND button to turn on or off the MUTE

mode.

Each press toggles between the MUTE ON and OFF

modes.

NOTE

The initial setting at the factory is “MUTE ON.”

4 Press the SETUP button again to return to normal

operation.

Scroll Setting

This CD player can scroll the disc and track names

recorded on CD-TEXT discs, as well as the text

information of MP3 files, folder names, and ID3 tags.

1 Press and hold the SETUP button for at least 3

seconds.

2 Press the f UP or g DN button to select the

TEXT SCROLL mode.

3 Press the BAND button to toggle mode between AUTO

and MANUAL.

• AUTO: the CD text information, the text information

of folder and file names, and the ID3 tags are

scrolled automatically.

• MANUAL: the display is scrolled only when a disc is

loaded or when a track is changed, etc.

4 When the setting is completed, press the SETUP

button to return to the normal mode.

NOTES

• The initial setting at the factory is “MANUAL.”

• The unit scrolls CD text names, folder names, file names or

ID3 tag display. The disc titles input manually (refer to page

16) cannot be scrolled.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Alpine CDA-7998 Manuel du propriétaire Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Alpine CDA-7998