Alpine CDA-7998 Manuel du propriétaire télécharger pdf (Page 25)

23-EN

Controlling CD Changer

(

Optional

)

An optional 6-disc or 12-disc CD Changer may be

connected to the CDA-7998R if it is Ai-NET compatible.

With a CD Changer connected to the Ai-NET input of

the CDA-7998R, the CD Changer will be controllable

from the CDA-7998R.

Using the KCA-400C (Multi-Changer Switching device)

or the KCA-410C (Versatile Link Terminal) multiple

changers can be controlled by the CDA-7998R.

See the Multi-Changer Selection section on this page

for selecting the CD Changers.

NOTES

• The controls on the CDA-7998R for CD Changer operation

are operative only when a CD Changer is connected.

• The “changer” indicator illuminates when a CD changer is

connected.

• The DVD changer (optional) is controllable from the CDA-

7998R as well as the CD changer.

• If a changer compatible with MP3 is connected, the changer is

also controllable from the CDA-7998R of the built-in MP3.

1 Press the SOURCE button to activate the CHANGER

mode. The display shows the disc number and track

number.

NOTES

• The source indicator varies depending on the connected

source.

• Press the BAND button to switch the Disc mode in the CD/

CHANGER mode.

2 Press the Disc Select buttons (1 through 9, 0, , )

corresponding to one of the discs loaded in the CD

Changer. The selected disc number appears in the

display and CD playback starts.

NOTES

• “O” on the Select buttons correspond to Disc number 10.

“ ” on the Select buttons correspond to Disc number 11.

“ ” on the Select buttons correspond to Disc number 12.

• The Disc Select buttons (7 to 12) are not used with the 6-

disc CD Changer.

• After selecting the desired disc, you can operate in the same

way as for the CDA-7998R CD player.

For details, please see the CD Operation section.

• If the Disc Select buttons are nonfunctional, press F button

to turn the "FUNCTION OFF" mode.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers, the

KCA-400C (Multi-Changer Switching device) must be

used. If you use 1 Switching device, you can connect

up to 4 CD Changers. If you use 2 Switching devices,

you can connect up to 6 CD Changers. When using

KCA-410C (Versatile Link Terminal), you can connect

two changers and two external outputs (AUX).

1 Press the SOURCE button on the CDA-7998R to

activate the CD Changer mode.

Alternatively, press the SOURCE button on the

Remote Control (RUE-4187) to activate the CD

Changer mode.

2 Press the BAND button on the CDA-7998R or the

RUE-4187 to activate the CD Changer Selection mode.

3 The CD Changer Selection mode remains active for 5

seconds after step 2 is performed. Press the BAND

button until the desired CD Changer indicator appears

on the display.

NOTE

If the selected CD Changer is not connected, the display will

show “NO CHANGER.”

Alternatively press the BAND button on the Remote

Control until the desired changer indicator appears on

the display.

4 To operate the selected changer, see “CD Player

Operation” section.

NOTE

For further details about the external input (AUX) when using

KCA-410C, see ”Setting the AUX Mode (V-Link)" on page 30.

BANDSOURCE

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Alpine CDA-7998 Manuel du propriétaire Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Alpine CDA-7998