Alpine CDA-7892E Manuel du propriétaire télécharger pdf (Page 7)

5-EN

Display Angle Adjustment

Movable display

The movable display may be adjusted to 3 different

angles depending upon user preference.

1 Press the ANGLE 89 button to adjust the angle of the

movable display.

NOTES

• The display will close a half minute after the ignition key is

turned to the OFF position.

• The adjusted angle of the display is stored in memory. There

is no need to re-adjust the angle when the power is turned

back on.

CAUTION

Keep hands (or any other object) away from the display while it

is opening or closing to avoid damage or injury. The back of the

movable display will get very warm under normal operating

conditions. This is not a malfunction. Do not touch.

Adjusting Volume/Balance (Between

Left and Right)/Fader (Between Front

and Rear)/Defeat

1 Press the MODE (Rotary encoder) button repeatedly

to choose the desired mode.

Each press changes the modes as follows:

Volume : 0 ~ 35

Balance : L15 ~ R15

Fader: R15 ~ F15

Subwoofer: 0 ~ +15

NOTES

• If the MODE button is not pressed within 5 seconds after

selecting the BALANCE, FADER, DEFEAT or SUBWOOFER

mode, the unit automatically returns to the VOLUME mode.

•∗ When the subwoofer mode is OFF, its level cannot be

adjusted.

2 Turn the Rotary encoder until the desired sound is

obtained in each mode.

By setting Defeat ON, previously adjusted settings of

BASS, Treble will return to the factory defaults, but MX

will be turned off.

Audio Mute Function

Activating this function will instantly lower the volume

level by 20 dB.

1 Press the MUTE button to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing the MUTE button again will bring the audio

back to its previous level.

Displaying Time

1 Press the CLK (clock) button repeatedly until the time

is displayed.

Each press changes the modes as follows:

Radio mode

CD Player/Changer modes

NOTES

• Selecting any tuner or CD function while in the clock priority

mode will interrupt the time display momentarily. The

function selected will be displayed for about 5 seconds before

the time returns to the display.

• When the power is off but the ignition key is on, press the CLK

button to display the time.

•∗ The display above is shown with a CD-TEXT compatible

changer connected.

Setting Time

1 In the Clock priority mode, press and hold the CLK

(clock) button for at least 3 seconds while the time is

displayed. The time indication will blink.

2 Turn the Rotary encoder to adjust the hours while the

time indication is blinking.

3 When the hour has been adjusted, press the Rotary

encoder.

4 Turn the Rotary encoder to adjust the minutes while

the time indication is blinking. The time is automatically

set 5 seconds after the minute adjustment. The time

can also be manually set by pressing the Rotary

encoder.

Playing time

mode

→

DISC TEXT

mode

→→

Clock priority

mode

TRACK

TEXT mode

←

TITLE mode

←

→ BALANCE → FADER → DEFEAT

SUBWOOFER*← VOLUME ←

→

Radio frequency

→ →

TITLE mode

Clock priority

mode

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Alpine CDA-7892E Manuel du propriétaire Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Boîtiers de commutation en série Alpine CDA-7892E