Alpine HCE-C105 - Rear View Camera System Manuel du propriétaire Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 41
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
25-EN
Vehicle function Setting
The Climate screen will be tuned in if you adjust the air condition in
your vehicle.
You can adjust the display time for Climate screen by this setting.
Setting item: Climate screen interrupt time
Setting contents: None / 5s / 10s / Continued display
For details, please refer to “Access to Climate Mode” (page 10).
Depending on your vehicle, this setting item may be disabled.
The Parking Assist screen will be tuned in if the obstacle within a
certain distance is detected by the front or rear sensor of your vehicle.
You can adjust the display time for Parking Assist screen by this setting.
Setting item: Parking sensor interrupt time
Setting contents: None / 5s / 10s / Continued display
For details, please refer to “Parking Assist Interrupt Function”
(page 10).
Depending on your vehicle, this setting item may be disabled.
You can choose the type of your vehicle by this setting. The Parking
Assist system will provide more accurate information based on your
vehicle type.
Setting item: Vehicle type
Setting contents: Sedan / Hatchback / Pickup
Depending on your vehicle, this setting item may be disabled.
About iLX-700
You can view the model name, serial number and the version
information of the version product. Make note of this information and
refer to it whenever you contact Alpine Tech Support or an Alpine-
authorized dealer.
Contents: iLX-700 (model name) / Serial Number / Firmware
Version
You can initialize all data, to restore the factory settings. Remove the
USB memory, etc. from the system before operation.
Setting item: Clear All Settings
1
Touch [RESET] of “Clear All Settings.
2
After the confirmation message appears, touch
[OK].
The system starts initialization.
Do not turn on/off the power or change the ignition key position until
system restart is completed.
Demonstration Setup
This unit has a Demonstration feature for the display. When you install
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, turn off the Demo mode.
Setting item: Demo mode
Setting contents: OFF / ON (Initial setting)
If you perform an operation during the Demo Mode, the
demonstration is temporarily stopped.
Setting the Climate screen interrupt time
Setting the Parking sensor interrupt time
Setting the Vehicle type
Displaying the Product Information
Initializing the System
Canceling the Demonstration
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 40 41

Commentaires sur ces manuels

Pas de commentaire