Alpine HCE-C105 - Rear View Camera System Manuel du propriétaire Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 41
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
10-EN
Parking Assist Interrupt Function
When the unit is connected to the vehicle equipped CAN Interface box.
A Parking Assist screen may be tuned in if the obstacle within a certain
distance is detected by the front or rear sensor of your vehicle.
You can adjust the interrupt time for Parking Assist screen by “Setting
the Parking sensor interrupt time” on page 25.
Depending on your vehicle, this function may not be supported.
When the obstacle within a certain distance is detected
by the front or rear sensor, the Parking Assist screen
displays and the indicator ( ~ ) of the corresponding
area lights up.
According to the distance from far to near, the colour of indicator
from yellow to orange to red.
Display example for Parking Assist screen
You can also activate the Parking Assist screen by touch the Parking
Assist icon on the Home screen.
Access to Climate Mode
When the unit is connected to the vehicle equipped CAN Interface box,
you can check the vehicle’s air conditioning.
You can adjust the interrupt time for Climate screen by “Setting the
Climate screen interrupt time” on page 25.
The Climate screen will be tuned in if you adjust the air
condition in your vehicle.
The Climate mode screen is displayed. You can check the
information of your vehicle’s air condition from the screen.
Display example for Climate screen
Depending on the car type, some functions may not be available even
though the CAN Interface box is connected.
You can also activate the Climate screen by touch the Climate icon
on the Home screen.
Applying TuneIt
This units sound tuning is programmable from a connected iPhone. It is
also possible to download specific parameters for certain vehicles from
Alpine’s TuneIt database stored in the Cloud. Using the TuneIt App,
customized parameters can also be uploaded for others to share and rate.
The installed TuneIt App should be launched on the iPhone before
connecting to the head unit.
TuneIt, is downloadable from Apple’s App Store. For details, consult
your Alpine dealer.
The application programme and related specifications and data may
be deleted or terminated without notice.
About iPhone models usable with this unit, refer to Apple CarPlay
section (page 13).
After completing the procedure above, your iPhone can be used to make
audio adjustments for this unit.
1
Make sure the unit is powered on.
2
Launch the TuneIt App on the iPhone. Adjust the
unit’s sound accordingly on the iPhone.
Volume level cannot be adjusted via the iPhone.
The setting cannot be done on both the iPhone and this unit at the
same time.
When the unit is powered off, etc., sound setting cannot be done via
the iPhone.
Please obey all local traffic laws while using this function.
Adjusting the sound via the iPhone
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 40 41

Commentaires sur ces manuels

Pas de commentaire