Alpine X009-FD1 Manuel d'installation télécharger pdf (Page 7)

Ford F-150

FULL SIZE TRUCK  7/12

Factory unit disassembly process

1 In the passenger side of the vehicle open the glove

box and push the side tabs towards inside to

release the glove box. Extract 3 X 8 mm (may also

be 3 x 10 mm) bolts to release the airbag.

2 Without disconnecting the Airbag push it out far

enough to expose the copper plated 7 mm screw

on the left side of the airbag and extract it.

3 Remove the instrument cluster panel by extracting

2 x 7 mm screws.

4 Remove both side vent covers by unclipping them

using a panel remover tool.

5 Remove cover below HVAC and extract 7 mm

screw.

6 At the top of the radio bezel remove the rubber

screw cover, extract 2 x 7 mm screws and remove

the radio bezel.

7 Extract 4 x 7 mm screws from the factory radio and

remove it.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Alpine X009-FD1 Manuel d'installation Page 7