Alpine HCE-C105 - Rear View Camera System Manuel du propriétaire télécharger pdf (Page 14)

12-EN

Adjusting the Minimum Level of

Backlight (Dimmer Low Level)

Min (0) to Max (16) (Default Setting: Min)

If Low is set in “Setting the Brightness of the

Backlighting (Dimmer)” (page 11), you can adjust the

brightness of the backlighting. This function can be

used, for instance, to change the screen brightness

while traveling at night.

Changing the Base Color

Blue / Green / Red / Amber

Select your favorite base color. The default color is blue.

See navigation owner's manual to synchronize the base

color of navigation system (NVE-M300 only). Check "Sync

with Head Unit Color" under Display Setting.

Beep Function

On (Default Setting) / Off

On: Activates the beep when the button is pressed.

Off: Deactivates the beep. The beep will not be

produced when a button on the unit is pressed.

Adjusting the Touch Panel (Screen

Alignment)

You must adjust the touch panel when the display

position on the LCD and the touch position on the

touch panel do not match.

1 Touch [ ].

The adjustment screen appears.

Screen Adjustment

2 Press and hold the center of [

] mark

accurately and follow [

] mark as

appeared on the screen.

When the adjustment is completed, the Display

Setup Mode screen is displayed.

AUX Setup Operations

Adjusts the AUX display setting. Refer to page

14 for details.

Returns to the factory default settings of

AUX setup. The message, "Restore default

settings?" appears. Touch "Restore" to go

back to the default settings.

Source Name

Aux / DVD / DVD-HU / DVB-T / iPod / TV / Sirius TV

Select the name from the following list, to be used

for the product using the AUX input mode. This will

apply to the button name on Source Select screen

and the source name in title bar on AUX screen.

Setting the TV System

Auto / NTSC / PAL

The TV/Video system can be manually switched.

Setting the Video Signal

Composite / S-Video

The Video Signal selection menu is only available

in AUX source. AUX must be connected with either

Composite cable or S-Video cable. You cannot

connect both cables at the same time. It may cause

noise on the screen. Refer to System Connection

(Page 20).

Changing Sound Output (DVD-HU Vol. Control)

Off / On

Off: Outputs sound through the built-in speakers. The

volume indicator is displayed.

On: The built-in speaker is mute and head unit volume

is adjustable from TME-S370 touch volume control.

The volume indicator is not displayed. In order to

control DVD-HU volume, make sure remote wire is

connected to DVD head unit.

290533_TME370_r13.indb E12290533_TME370_r13.indb E12 7/29/09 1:29:15 PM7/29/09 1:29:15 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Commentaires sur ces manuels

Pas de commentaire

Alpine HCE-C105 - Rear View Camera System Manuel du propriétaire Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Électronique des véhicules automobiles Alpine HCE-C105 - Rear View Camera System