Alpine MULTIMEDIA MANAGER PXA-H701 Manuel d'utilisateur télécharger pdf (Page 11)

9-EN

9 Turn the Rotary encoder to switch the phase,

then press the CHANNEL button.

Press the ENTER button to return to step 8.

0 180

Repeat steps 7 to 9 to adjust other channels.

Once the adjustments are completed, press the

TCR/PHASE button.

NOTES

• When the speaker is set to the “OFF” mode, the TCR

for that speaker is ineffective. Refer to “Setting the

speakers” (page 4).

• After making the settings, we recommend storing

them in the memory. For instructions, see page 28.

(factory default)

6 Press and hold the CHANNEL button for at least

2 seconds and select “L and R (LR)” or “L or R”.

L and R (LR): Sets the same adjustment values

for the left and right channels.

L or R: Different adjustment values can

be set for the left and right

channels.

7 Press the CHANNEL button and select the

desired channel, then press the ENTER button.

When “L and R (LR)” is selected:

When “L or R” is selected:

*1 When center is set to subwoofer, it is not

displayed.

*2 When center is set to subwoofer, it becomes

Sub.W(L).

*3 When center is set to subwoofer, it becomes

Sub.W(R).

8 Turn the Rotary encoder to adjust the time

correction value (0.00 ~ 20.00ms), then press

the ENTER button.

* The difference in the sound when the defeat

mode is turned off (adjusted time

correction) and on (default value) can be

checked as follows:

1) While in the adjustment mode, press and

hold the TCR/PHASE button for at least 2

seconds.

2) Press the TCR/PHASE button to switch the

defeat mode on and off and listen to the

difference in the sound.

3) To quit, select the desired setting, then press

the ENTER button.

Note that if you press the ENTER button with

the defeat mode turned on, the adjustments

are reset to the defeat on status (the default

values).

L and R (LR) L or R

Center

Sub. W

Front 1 Front 2

Rear

Front 2 R

Center

Sub. W

Front 1 L Front 1 R

Front 2 L

Rear R Rear L

*2*3

TCR HPASEFL 1RR/

DE YCLA

10. ms2

PHA : 18 0 °SE

TCR HPASEFL 1RR/

DE YCLA

10. ms2

PHA : 180°SE

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Alpine MULTIMEDIA MANAGER PXA-H701 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Alpine MULTIMEDIA MANAGER PXA-H701