Alpine TDM-7582E Manuel du propriétaire télécharger pdf (Page 19)

17-EN

1 Antenna Receptacle

2 Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power

antenna, if applicable.

NOTE

This lead should be used only for controlling the vehicle's

power antenna. Do not use this lead to turn on an

amplifier or a signal processor, etc.

3 Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your

amplifier or signal processor.

4 Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's

fuse box or another unused power source which

provides (+) 12V only when the ignition is turned on

or in the accessory position.

5 Fuse Holder (15A)

6 Battery Lead (Yellow)

Connect this lead to the positive (+) post of the

vehicle's battery.

7 Ground Lead (Black)

Connect this lead to a good chassis ground on the

vehicle. Make sure the connection is made to bare

metal and is securely fastened using the sheet metal

screw provided.

8 Power Supply Connector

9 Right Front (+) Speaker Output Lead (Grey)

! Right Front (–) Speaker Output Lead (Grey/

Black)

" Right Rear (–) Speaker Output Lead (Violet/

Black)

# Right Rear (+) Speaker Output Lead (Violet)

$ Left Rear (+) Speaker Output Lead (Green)

% Left Rear (–) Speaker Output Lead (Green/Black)

& Left Front (–) Speaker Output Lead (White/Black)

( Left Front (+) Speaker Output Lead (White)

) DIN Connector

Connect this to the DIN connector on the CD

Changer.

~ Rear Output RCA Connectors

RED is right and WHITE is left.

+ DIN Extension Cable

NOTE

For some installations, an L-type DIN connector would

simplify installation. Use the Alpine 4910

02 Adapter (Sold

Separately) if your changer did not include an L-type

DIN.

, RCA Extension Cable (Sold Separately)

1 2 ... 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire

Alpine TDM-7582E Manuel du propriétaire Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Alpine TDM-7582E